Färgbilar

Våra vägmarkeringsbilar manövreras av en eller två personer som arbetar i hyttens säkra och bekväma miljö, varifrån all linjemarkering styrs av linjedelningsautomation med fjärrkontroller som joysticks och fotpedaler. Vägmarkeringsmaterialet appliceras av färgpistoler monterade på hydrauliskt drivna vapenvagnar, precis framför bakhjulen. Linjemarkeringen övervakas inifrån hytten med spegel och monitor, medan föraren håller en rak linje med hjälp av en siktstav eller lasersikte framför lastbilen. Linjerna som skapas lagras i LineController specificerad med linjetyp, bredd och utlagd längd.

HÖGTRYCK FÄRGBILAR

Airless road marking machine for solvent or water based cold paint.
  • 18 ton / 2 axl truck: max capacity 3x 1000 litres cold paint, fluid bag system
  • 26 ton / 3 axl truck: max capacity 5x 1000 litres cold paint, fluid bag system
  • 32 ton / 4 axl truck: max capacity 6x 1000 litres cold paint, fluid bag system
  • Application speed of up to 20 km/h
  • Hydraulic powered air compressor 3-5 m3/min 8 bars.
  • Glass bead tank with capacities from 450 to 1700 litres
  • Hydraulic powered high pressure piston pumps.
  • Hydraulic gun-wagon on both sides, operated by a joystick from truck cabin
  • 1 - 4 airless paint guns (Line-width of 10-15cm each gun) and glass bead guns
  • Flowmeter with monitor for real time flow and accumulated consumption
  • Controllable aiming device (Multi-direction)

LÅGTRYCK FÄRGBILAR

low pressure road marking machine for solvent or water based cold paint.
  • 18 ton / 2 axl truck: max capacity 3x 1000 litres cold paint, fluid bag system
  • 26 ton / 3 axl truck: max capacity 5x 1000 litres cold paint, fluid bag system
  • 32 ton / 4 axl truck: max capacity 6x 1000 litres cold paint, fluid bag system
  • Application speed of up to 20 km/h
  • Hydraulic powered air compressor 3-5 m3/min 8 bars.
  • Glass bead tank with capacities from 450 to 1700 litres
  • Air driven diaphragm paint pump.
  • Hydraulic gun-wagon on both sides, operated by a joystick from truck cabin
  • 1 - 4 paint guns (Line-width of 10-15cm each gun) and glass bead guns
  • Flowmeter with monitor for real time flow and accumulated consumption
  • Controllable aiming device (Multi-direction)

AIRPORT TRUCKS

We have developed a paint truck especially for the purpose of marking of runways and taxways on airports. It is operated by one person working in the truck-cabin safe and comfortable environment. The paint system has two separate paint gun wagons and is based on an airless system for environment friendly waterborne paints. The first gun wagon is placed on the left side between the front and rear axle and is mainly for painting curves on tax-ways etc. The second is placed on the left side behind the rear axle of the truck. It is connected to the main container, and is to be used mainly for the runways with 90 cm wide lines.
  • Main paint container: 1000 liter fluidbag (normally yellow)
  • Alternative color 1: 200 liter (for black/blue/red or white)
  • Alternative color 2: 200 liter (for black/blue/red or white)
  • Glass-bead container - 1x 650 liter
  • Paint pumps - 3x 25 liter /min. Max pressure 138 bar
  • Compressor - 1,84 m3/min (65 CFM)
  • Hydraulic valves - Danfoss pvg 32
  • Hydraulic gun-wagon on both sides, operated by a joystick from truck cabin
  • Paint capacity - 90cm line /350my - 5km/h. 15 cm line/350 my- 15 km/h
  • Controllable aiming device (Multi-direction)